Please pardon our progress as we are updating our website to reflect our new service plan offerings to better meet our customer needs. For specific service plan related questions, please contact us at 1-888-Griffy1

Commercial heating, ventilation, and air conditioning (HVAC) systems require thorough maintenance and care, especially in early spring. It’s a worthwhile investment that offers plenty of benefits, from improving air quality to making occupants feel comfortable. Here are five essential tips for preparing commercial HVAC systems for spring in Hagerstown, MD.

1. Clean Up Around the Outdoor Unit

The cold weather and winds in winter probably caused leaves and dirt to accumulate around your outdoor unit. Sweep around it using a broom to remove debris. If it’s dirty, you can rinse it with water using a hose — but not a power washer, which could damage the unit’s tubes and coils.

While you’re at it, make sure to pay attention to your indoor unit as well. Check to make sure the filters aren’t worn out and damaged; if they are, they’ll cause your HVAC system to operate inefficiently. Change or wash them if needed.

2. Switch to a Smart Thermostat

If you have not done so already, it might be time to get a smart thermostat. Sure, your old one may still be working, but imagine a cool and comfy space that helps you save money on energy bills. A smart thermostat will assist your system in operating at peak efficiency.

3. Inspect Other Heating and Cooling Components

Check your system and see if you can find anything wrong. Make sure to inspect the important parts, including ductwork, ensuring that there are no leaks and blockages that may damage them.

If you notice that energy consumption has increased, it may be because the heat exchange efficiency or the transfer of heat between the heater or cooling unit to the air in the building has decreased. Dirty evaporator and condenser coils are among the primary causes of this issue. Clean them to remove dust and debris.

Also, confirm that the belts and pulleys are free from signs of wear and tear. Motors and bearings must receive proper lubrication to reduce friction and help extend their lifespan.

While some tasks are manageable, you don’t have to do them on your own. You can contact HVAC technicians from Griffith Energy Services to schedule routine tune-ups for your commercial system.

4. Install an Air Purifier

Say goodbye to incessant sneezing this spring with the help of an air purifier. It is valuable for those who have allergies and breathing problems, such as COPD and asthma, which often get worse during the warmer months.

5. Give the System a Test Run

Allow your HVAC system to undergo an adequate test run, which will give you an idea about its performance. Never wait until you need to use your air conditioner before testing it for the first time in the spring.

Benefits of an Annual Preventive Maintenance Check

Making sure that your HVAC system works properly through a once-a-year preventive maintenance check before spring can offer these advantages:

  • Prevents costly system breakdowns
  • Lowers energy costs by up to 15%, according to the U.S. Department of Energy
  • Ensures HVAC system remains protected under warranty
  • Improves system performance and safety

Spring in Hagerstown presents different demands on your commercial HVAC system compared to fall or winter. Even with snow still on the ground and the warm weather seeming far away, make sure to contact an HVAC specialist to prepare your system for the upcoming season.

Schedule a visit from our HVAC technicians, who will check your unit, make repairs, and clean the system thoroughly. Call our team at Griffith Energy Services today to arrange for maintenance so that you can be worry-free about the performance of your commercial HVAC system when spring arrives. We’ve been providing HVAC repair, installation, and maintenance services in the Hagerstown area for over 100 years, so you can be sure you’ll be in good hands with our professionals.

Image provided by iStock

Pin It on Pinterest

Compliance Settings
Increase Font Size
Grayscale
Simplified Font
Underline Links
Highlight Links
Reset
Close